Router Type PCB Separator｜CUTTING, CLEANING, MEASUREMENT technology

HOME＞ PRODUCTS INFORMATION＞ Dry Dicer Type＞ SAM-CT3SLG

ROUTER TYPE PCB SEPARATOR｜DRY DICER TYPE PCB SEPARATOR｜CONTINUOUS WIRE CUTTER｜WIPING CLEANER

Dicer Type TOP｜ SAM-CT3SLG｜ SAM-CT33SL｜ SAM-CT1520D｜ SAM-CT3030DI｜ SAM-CT1520DFA｜
SAM-CT2533D

SAM-CT3SLG

Dry Slicer Type

Revolve griding wheel at high speed, and so reduce cutting stress to PCB extremely. Dry Slicer(One Axis Cutting) to have a cutting edge with low stress and sharpness.

Low cost is realized by simple design. SAM-CT3SLG can be used for development, prototype and production.

Desktop Type Separator.
Cutting Edge with Low Stress and Sharpness.
V-groove is not needed.
It is possible to cut PCB with big component parts. (both sides)
The life of blades can be extended by using blades with large diameter.

PCB	Max Cutting Range	330mm
	Max Cutting Length per once	196mm(STD)　296mm(OP)
	Material	FR4、CEM1、CEM3 etc.
	Height Limit of Parts	47mm from PCB upper surface, 10mm from underside surface
Main axis	Type of Motor	Inverter driving induction motor 100W
Main axis	Standard Main axis Rotational Frequency	2,000～7,000rpm
Main axis Mod	Type of Motor	DC Motor
	Max Return Rate	70～150mm/sec
	Cutting Speed	20～100mm/sec
	Blade (GC Wheel)	OD=125mm、ID=40mm、t=0.2～0.5mm、0.3（STD）
	PCB Holding	Cut with holding mechanical chuck and slide rail
Equipment	Electricity	1φ 100V 50/60Hz
	Max Power Consumption	AC300VA（dust collector is count outed）
	Dimension (Controller BOX Dimension)	W463mm×D779mm×H352mm(when chuck is stored) (W170mm×D420mm×H363.5mm)
	Net Weight	Approx.50kg
	Dust Collector	1φ　100V　50/60Hz、Approx.1KVA

SUPPORT